There are a number of people who think that to use a vinyl cutter, one has to place the blade in the machine, and it will start cutting vinyl perfectly. In reality, the blades for the vinyl cutters may involve some technical jargon, and this can be pretty exhausting for beginners. But once a person can understand all the terms, it is possible to achieve cutting greatness.
Vinyl cutter blades are of different types, and each comes with distinct advantages. One must understand the offset values, the impact of degrees, and the brands. Flex Cutter is one of the top suppliers of vinyl cutters as well as spare parts, including the blades.
What is the Vinyl Cutter Blade Offset?
The blade offset is known to be the distance between the center of the blade and the tip. This offset value helps to make sure that the machine takes the blade into account while cutting and that it doesn't accidentally cut into the design. Therefore, it is essential to pay attention to the offset for the blade of the manufacturer because the value keeps changing with the type of the blade.
What are the Blade Offset Settings
If you are cutting vinyl and finding it challenging to achieve accurate corners, then it could be the offset settings. Blade offset is considered to be a mystery set on the vinyl cutter, and only a few people are able to adjust it. Numerous people may need to learn that the setting exists.
The offset value of the blade determines how far past the real corner it has to move to drag the blade's tip toward the actual corner. Although the default value in your software has to work fine, if the corners need to be cut correctly, then you might need to adjust the blade offset value.
You can change the blade offset value in the cutter settings window. This particular window can be accessed by selecting the cutter settings available in the cutter menu. Other than that, you can also click on the settings button found in the cut window.
Problems with the Sure Cuts A Lot 4
Although you will have no issues with the Sure Cuts A Lot Bridge, Sure Cuts A Lot 2, Lot 3, and Lot 5, a problem with the Sure Cuts A Lot 4.080 causes blade offset. In order to fix this particular problem, it is always better to update to the new version of SCAL4. Before installing the latest version, remember to uninstall their SCAL version.